Beko Air Conditioner Error Code

Your Beko air conditioner has shut off or you just notice any unusual symptoms? Check out the appliance for an error code. This simple code is the clue to fixing the air conditioner. Find it in the table below and learn what part to check and what actions to take so as to return the appliance back to life. The description of the error codes was provided by the Beko brand.

CodeDescription
E1Failure of the evaporator temperature sensor:connection between the sensor plug and the electric control panel is not very good, or there is something wrong with sensor.
E2Failure of room temperature sensor:connection between the sensor plug and the electric control panel is not very good, or there is something wrong with sensor.
E3cooling system is abnormal:the compressor does not start,or there is something wrong with down fan motor.
E4Anti-frozen protection,it is normal.
P2Water is full.
the display is not complete, or the indicator is not flash 1. Possiblly because the connection between the electric control panel and the display board is not very good. just connect it again.

2. It also might because the problem of the display board, please change the display board.